|
| |
TM 9-2320-304-14&P
4-234.19
Organizational Maintenance Instructions (Cont)
(6)
Remove four screws (12) and pin
bracket (11) from arm assembly (13).
b. Disassembly.
NOTE
Perform steps (1) through (5) only if
components are damaged.
(1)
Remove screw (1), washer (2),
washer (3), and spring (4) from short
strut (5).
(2)
Remove grease fitting (6) from short
strut (5).
(3)
Remove retaining ring (7), spacer (8),
and bearing (9) from short strut (5).
(4)
Remove screw (10) and jam nut (11)
from flip lock (12).
(5)
Remove roll pin (13), pin (14), and flip
lock (12) from pin bracket (15).
Change 1
|
