|
| |
TM 9-2320-304-14&P
4-234.9
Organizational Maintenance Instructions (Cont)
(3)
Install reflector (7), reflector
housing (8), and two self-tapping
screws (9) on slider (5).
(4)
Position wear plate (10) on slider (5) and
install ten socket head screws (11) and
locknuts (12).
NOTE
Seals must be installed with open groove to
the outside.
(5)
Install two seals (13) in slider pivot (14).
(6)
Install two grease fittings (15) in slider
pivot (14).
Change 1
|
