|
| |
TM 9-2320-304-14&P
4-232
Organizational Maintenance Instructions (Cont)
4-53. DECK ASSEMBLY REPLACEMENT.
Supplies
Locknuts (8), Item 1, Appendix K
This task covers:
a. Removal
b. Installation
c. Follow-on Maintenance
INITIAL SETUP
Personnel Required
MOS 63S, Heavy wheel vehicle mechanic
Equipment Condition
TM or Para
Condition Description
TM 9-2302-279-10 Engine OFF
TM 9-2320-279-10 Wheels chocked
References
None
Special Tools
Tool Kit, General Mechanic’s: Automotive,
Item 33, Appendix B
Models
M1120
Test Equipment
None
Special Environmental Conditions
None
General Safety Instructions
None
a. Removal.
WARNING
After removing deck, caution must be used not to get impaled on brackets.
(1) Remove four locknuts (1), eight washers (2), four springs (3), four screws (4), and deck (5) from
brackets (6 and 7). Discard locknuts.
(2) Remove two locknuts (8), screws (9), and bracket (10) from bracket (6). Discard locknuts.
(3) Remove four locknuts (11) and screws (12) from brackets (6 and 7). Discard locknuts.
NOTE
Left-hand bracket must be rotated towards the front of the truck to remove.
(4) Remove brackets (6 and 7) from frame rail (13).
|
