|
| |
TM 9-2320-304-14&P
4-219
Organizational Maintenance Instructions (Cont)
4-48. REAR ROLLER ASSEMBLY REPLACEMENT.
Special Tools
Tool Kit, General Mechanic’s: Automotive,
Item 33, Appendix B
Multiplier, Torque, Item 15, Appendix B
Socket Set, 3/4 in., Item 23, Appendix B
Wrench, Combination 1-1/8 in., Item 37,
Appendix B
Lifting Device, Minimum Capacity 375 lbs
(170 kg)
Supplies
Adhesive, Item 1, Appendix F
Locknut (6), Item 2, Appendix K
This task covers:
a. Removal
b. Installation
c. Follow-on Maintenance
INITIAL SETUP
Personnel Required
MOS 63S, Heavy wheel vehicle mechanic (2)
Equipment Condition
TM or Para
Condition Description
TM 9-2320-279-10 Engine OFF
TM 9-2320-279-10 Wheels chocked
References
None
Models
M1120
Test Equipment
None
Special Environmental Conditions
None
General Safety Instructions
None
a. Removal.
WARNING
Rear roller assembly weighs 375 lbs (170 kg). Attach suitable lifting device prior to removal
or installation to prevent possible injury to personnel.
(1) Attach lifting device to rear roller assembly (1).
(2) Remove six locknuts (2) and six screws (3) from rear roller assembly (1). Discard locknuts.
|
