|
| |
TM 9-2320-304-14&P
4-208.1
Organizational Maintenance Instructions (Cont)
4-43.1 CONTAINER HANDLING UNIT (CHU) REAR LIGHT BAR ASSEMBLY
REPLACEMENT.
This task covers:
a. Removal
b. Installation
c. Follow-on Maintenance
INITIAL SETUP
Supplies
Cable Ties, Item 4, Appendix F
Tags, Identification, 19, Appendix F
Lockwasher (2), Item 15, Appendix K
Personnel Required
MOS 63S, Heavy wheel vehicle mechanic
Equipment Condition
TM or Para
Condition Description
TM 9-2320-279-10 Engine OFF
TM 9-2320-279-10 Wheels chocked
Para 4-49
Bumper stop stinger
bracket removed.
References
None
Special Tools
Tool Kit, General Mechanic’s: Automotive,
Item 33, Appendix B
Models
M1120
Test Equipment
None
Special Environmental Conditions
None
General Safety Instructions
None
a. Removal.
NOTE
·
Tag and mark all wires before disconnecting.
·
Cut wire ties as needed
(1)
Tag and disconnect wires to rear light bar (1), and clearance light (2).
(2)
Remove two nuts (3), lockwashers (4), and rear light bar (1). Discard lockwashers.
NOTE
Both clearance lights remove the same. Right side shown.
(3)
Remove two nuts (5), lockwashers (6), and right clearance light (2) from rear roller assembly (7).
Discard lockwashers.
Change 1
|
