|
| |
TM 9-2320-304-14&P
4-206
Organizational Maintenance Instructions (Cont)
4-42. MARKER/CLEARANCE LIGHT REPLACEMENT (CONT).
(3) Remove light emitting diode (4).
(4) Remove two nuts (5), screws (6), ground
wire (7), mounting base (8), mounting
gasket (9), and pigtail (10).
b. Installation.
(1) Install mounting gasket (1), mounting
base (2), pigtail (3), ground wire (4),
screws (5), and nuts (6). Tighten nuts.
(2) Install light emitting diode (7).
(3) Install outer bracket (8) and two
screws (9).
(4) Connect wire (10).
c. Follow-on Maintenance. Remove wheel
chocks (TM 9-2320-279-10).
END OF TASK
|
