|
| |
TM 9-2320-304-14&P
4-202
Organizational Maintenance Instructions (Cont)
4-41. LHS JUNCTION BOX REPLACEMENT (CONT).
b. Installation.
WARNING
Adhesives, solvents, and sealing
compounds can burn easily, give off
harmful vapors, and are harmful to skin
and clothing. To avoid injury or death,
keep away from open fire and use in
well-ventilated area. If adhesive, solvent,
or sealing compound gets on skin or
clothing, wash immediately with soap and
water.
NOTE
Wire numbers on harnesses match
numbers on terminal strip.
(1) Apply adhesive to back plate of
connector (1).
(2) Install harness (2) and connector (1) in
junction box (3) with four screws (4) and
locknuts (5).
(3) Install four bulkheads (6) on junction
box (3) with locknuts (7).
(4) Apply adhesive to back plate of terminal
strip (8).
(5) Install terminal strip (8) with two
screws (9) and locknuts (10).
(6) Install wires 1461 (11), 1435 (12),
1435 (13), 1469 (14), 1466 (15),
1470 (16), and 1475 (17) on terminal
strip (8).
(7) Install junction box (3) on truck with
four screws (18) and lockwashers (19).
(8) Install MC87 connector (20) on
connector (1).
|
