|
| |
TM 9-2320-304-14&P
4-181
Organizational Maintenance Instructions (Cont)
(6) Remove nut (19), two clamp halves (16), and nut (20) from proximity switch (17). Discard
lockwashers.
(7) Remove two locknuts (21), screws (22), four washers (23), and proximity switch mounting
plate (18) from main frame (24).
b. Installation.
NOTE
Install cable ties as required.
(1) Position proximity switch mounting plate (1), four washers (2), two screws (3), and locknuts (4)
on main frame (5).
|
