|
| |
Malfunction
Test or Inspection
Corrective Action
TM 9-2320-304-14&P
4-142.18
Organizational Maintenance Instructions (Cont)
4-18. TROUBLESHOOTING INSTRUCTIONS (CONT).
Table 4-3.1. Container Handling Unit (CHU) Troubleshooting (CONT)
CONTAINER HANDLING UNIT (CHU) (CONT)
4. MAIN FRAME DOES NOT GO TO TRAVEL POSITION (CONT).
WARNING
Remove all jewelry such as rings, dog tags, bracelets, etc. If jewelry or tools contact positive
electrical circuits, a direct short may result. Damage to equipment and injury or death to
personnel may occur.
Step 4. Remove relay R56 and check for continuity between relay 56, terminal 2 and a known good
ground.
If there is no continuity, Fault not fixed. Repair wire 1435.
If there is continuity, replace relay R56.
Change 1
|
