|
| |
Malfunction
Test or Inspection
Corrective Action
TM 9-2320-304-14&P
4-126
Organizational Maintenance Instructions (Cont)
4-18. TROUBLESHOOTING INSTRUCTIONS (CONT).
Table 4-3. Load Handling System (LHS) Troubleshooting (CONT)
LOAD HANDLING SYSTEM (LHS) (CONT)
16. LHS DOES NOT LOAD IN AUTO MODE.
Step 1. Check clearance between proximity switch (main frame down) and compression frame
.12 ± .01 in. (3 ± .25 mm) with main frame down completely.
If clearance is more than .13 in. (3.3 mm) or less than .11 in. (2.8 mm), proximity
switch is not adjusted correctly. Adjust proximity switch (Para 4-37).
|
