|
| |
Malfunction
Test or Inspection
Corrective Action
TM 9-2320-304-14&P
4-104
Organizational Maintenance Instructions (Cont)
4-18. TROUBLESHOOTING INSTRUCTIONS (CONT).
Table 4-3. Load Handling System (LHS) Troubleshooting (CONT)
LOAD HANDLING SYSTEM (LHS) (CONT)
13. HOOK ARM DOES NOT LOAD IN MANUAL MODE (CONT).
WARNING
Remove all jewelry such as rings, dog tags, bracelets, etc. If jewelry or tools contact positive
electrical circuits, a direct short may result. Damage to equipment and injury or death to
personnel may occur.
Step 8. Check for continuity on wire 1467 at harness connector MC81 terminal B chassis ground
with hook arm down DC valve harness connector terminal 2 jumpered to ground.
If there is no continuity, repair wire 1467 or notify DS Maintenance.
|
