|
| |
Malfunction
Test or Inspection
Corrective Action
TM 9-2320-304-14&P
4-94
Organizational Maintenance Instructions (Cont)
4-18. TROUBLESHOOTING INSTRUCTIONS (CONT).
Table 4-3. Load Handling System (LHS) Troubleshooting (CONT)
LOAD HANDLING SYSTEM (LHS) (CONT)
12. HOOK ARM DOES NOT UNLOAD IN MANUAL MODE (CONT).
WARNING
Remove all jewelry such as rings, dog tags, bracelets, etc. If jewelry or tools contact positive
electrical circuits, a direct short may result. Damage to equipment and injury or death to
personnel may occur.
Step 8. Check for continuity on wire 1464 at harness connector MC81 terminal D and chassis
ground with hook arm up DC valve harness connector terminal 2 jumpered to chassis
ground.
If there is no continuity, repair wire 1464 or notify DS Maintenance.
|
