| |
Malfunction
Test or Inspection
Corrective Action
TM 9-2320-304-14&P
4-87
Organizational Maintenance Instructions (Cont)
Table 4-3. Load Handling System (LHS) Troubleshooting (CONT)
LOAD HANDLING SYSTEM (LHS) (CONT)
12. HOOK ARM DOES NOT UNLOAD IN MANUAL MODE.
WARNING
The LHS hydraulic system operates at oil pressures up to 1,725 psi (11 894 kPa). Never
disconnect any hydraulic line or fitting without first dropping pressure to zero. Failure to
comply may result in serious injury or death to personnel.
Step 1. Check LHS hydraulic hoses 2881, 2882, 2891, and 2892 for damage, crimps, or leaks.
Check fittings for leaks.
If hoses are damaged, crimped, or leaking, replace hoses. If fittings are leaking
tighten them.
|