|
| |
Malfunction
Test or Inspection
Corrective Action
TM 9-2320-304-14&P
4-79
Organizational Maintenance Instructions (Cont)
Table 4-3. Load Handling System (LHS) Troubleshooting (CONT)
LOAD HANDLING SYSTEM (LHS) (CONT)
11. LHS DOES NOT OPERATE.
WARNING
The LHS hydraulic system operates at oil pressures up to 1,725 psi (11 894 kPa). Never
disconnect any hydraulic line or fitting without first dropping pressure to zero. Failure to
comply may result in serious injury or death to personnel.
Step 1. Check LHS hydraulic hoses 902 and 2917 for damage, crimps, or leaks and fittings for
damage or leaks.
If hoses are damaged, crimped, or leaking, replace hoses. If fittings are leaking,
tighten them.
|
