|
| |
Malfunction
Test or Inspection
Corrective Action
TM 9-2320-304-14&P
4-32
Organizational Maintenance Instructions (Cont)
4-18. TROUBLESHOOTING INSTRUCTIONS (CONT).
Table 4-3. Load Handling System (LHS) Troubleshooting (CONT)
LOAD HANDLING SYSTEM (LHS) (CONT)
2. LHS NO TRANSIT INDICATOR DOES NOT OPERATE (CONT).
WARNING
·
Remove all jewelry such as rings, dog tags, bracelets, etc. If jewelry or tools contact
positive electrical circuits, a direct short may result. Damage to equipment and
injury or death to personnel may occur.
·
Keep clear of equipment when equipment is being raised or lowered. Equipment
may fall and cause serious injury or death to personnel.
CAUTION
When opening the main junction box, do not pull or allow front of junction box to hang by
wire connections. Failure to comply will damage the wire connections.
Step 8. Check for 22 to 28 Vdc at main junction box terminal 11 with hook arm up and ENGINE
switch in ON position.
If Vdc measurement is below specification, turn ENGINE switch to OFF position,
replace proximity switch (Para 4-35).
|
