|
| |
TM 9-2320-304-14&P
2-86.1
Operating Instructions (Cont)
CAUTION
Engine speed must be at idle before using hydraulic selector switch, or damage to
equipment may result.
(2) Start engine (TM 9-2320-279-10).
(3) Put PTO ENGAGE switch (5) in ON position. Make sure indicator light (6) comes on.
(4) Turn hydraulic selector switch (7) to AUTO.
(5) Move joystick (8) to UNLOAD. Hook arm will raise and begin to move rearward. LHS NO
TRANS lamp (9) will illuminate to indicate hook arm is up and load lock has been cleared.
Change 1
|
