|
| |
TM 9-2320-304-14&P
2-82.157
Operating Instructions (Cont)
(14)
Support upper support leg (15) and remove two lock pins (17) from pins (18).
(15)
Remove upper support leg (15) from front lift adapter (7).
(16)
Position upper support leg (15) in stowage bracket on front lift adapter (7) and install two lock
pins (17) on pins (18).
(17)
Install pin (14), lock pin (13), and upper support leg (15) to stowage bracket on front lift
adapter (7).
(18)
Start engine (TM 9-2320-279-10).
(19)
Move joystick (4) to LOAD until LHS NO TRANS light (19) goes out and front lift adapter (7) is
positioned on bumper supports (20).
(20)
Turn hydraulic selector switch (3) to OFF.
(21)
Put PTO ENGAGE switch (1) in OFF position. Make sure indicator light (2) goes off.
Change 1
|
