|
| |
TM 9-2320-304-14&P
2-82.145
Operating Instructions (Cont)
(3)
Position ISO corner lock (6) in front bottom corner casting (8) of ISO container (9).
NOTE
ISO corner lock handle will point toward front or rear of truck when in locked position.
(4)
Rotate lock handle (4) 90 degrees to locked position and tighten handnut (5).
(5)
Rotate tab (3) down to lock handnut (5) and install lock pin (1) in bracket (10).
WARNING
Rail transport struts weigh 60 lbs. (27 kg). Use the aid of Soldier B when installing or
removing rail strut. Failure to comply may result in injury to personnel.
(6)
Remove two lock pins (11), pins (12), and rail transport strut (13) from stowage tray (7).
Change 1
|
