|
| |
TM 9-2320-304-14&P
2-82.111
Operating Instructions (Cont)
NOTE
Engine speed may be increased and decreased to ease loading.
(45)
After container (6) contacts rear sliders (21), increase engine speed to approximately 1500 rpm
until container is almost loaded. Reduce engine speed to idle.
(46)
Continue loading until container (6) is fully loaded and LHS NO TRANS lamp (27) goes out.
(47)
Release joystick (10).
(48)
Pull out parking brake knob (3) to apply parking brake.
CAUTION
·
Engine speed must be at idle before using hydraulic selector switch, or damage to
equipment may result.
·
Hydraulic selector switch must be in the OFF position before driving truck, or
hydraulic system could overheat.
(49)
Turn hydraulic selector switch (9) to OFF.
(50)
Put PTO engage switch (7) in OFF position. Make sure indicator light (8) goes off.
(51)
Shut off engine (TM 9-2320-279-10).
Change 1
|
