|
| |
TM 9-2320-304-14&P
2-82.73
Operating Instructions (Cont)
(15)
Remove lock pin (17) and pin (18) from front lift adapter (1) slide arm (16) upper hole.
(16)
Install pin (18) and lock pin (17) in stow position on front lift adapter (1).
(17)
Repeat steps (13) through (16) for left side.
NOTE
·
There are two front lift adapter lower container locks and rear sliders. Right side
shown.
·
Make sure front lift adapter lower container lock handle is positioned in slot on
handle lock plate.
·
Make sure tab on handnut faces up.
(18)
Raise handle lock plate (19) and rotate lower container lock handle (20) toward center of front
lift adapter (1) to unlocked position.
(19)
Release handle lock plate (19) on front lift adapter (1).
(20)
Repeat steps (18) and (19) for left side.
Change 1
|
