|
| |
TM 9-2320-304-14&P
2-82.69
Operating Instructions (Cont)
(3)
Start engine (TM 9-2320-279-10).
(4)
Push in parking brake knob (3), apply service brake pedal (4), and set transmission range
selector (5) to R (Reverse).
(5)
Release service brake pedal (4) and position rear of truck within 9 ft. (2.74 m) of front of
container (6), alining centerline of truck within 2 in. (5 cm) of container centerline.
(6)
Apply service brake pedal (4) and set transmission range selector (5) to N (Neutral).
(7)
Put PTO ENGAGE switch (7) in ON position. Make sure indicator light (8) comes on.
CAUTION
Engine speed must be at idle before using hydraulic selector switch, or damage to
equipment may result.
(8)
Turn hydraulic selector switch (9) to AUTO.
Change 1
|
