|
| |
TM 9-2320-304-14&P
2-82.66
Operating Instructions (Cont)
2-10.3 LOADING AND UNLOADING CONTAINER (72 INCHES [183 CM] OR TALLER)
TO TRUCK USING FRONT LIFT ADAPTER (FLA) (CONT).
NOTE
The amount of time to load and unload is controlled by engine speed. Engine speed can be
increased to approximately 1500 rpm to reduce loading and unloading times.
(34)
Move joystick (10) to LOAD position until LHS is fully retracted and front lift adapter (20) is
positioned on bumper supports (21). LHS NO TRANS lamp (12) will go off, indicating LHS is in
transport position.
(35)
Release joystick (10).
CAUTION
·
Engine speed must be at idle before using hydraulic selector switch, or damage to
equipment may result.
·
Hydraulic selector switch must be in the OFF position before driving truck, or
hydraulic system could overheat.
(36)
Turn hydraulic selector switch (9) to OFF.
(37)
Put PTO ENGAGE switch (7) in OFF position. Make sure indicator light (8) goes off.
(38)
Shut off engine (TM 9-2320-179-10).
Change 1
|
