|
| |
TM 9-2320-304-14&P
2-82.27
Operating Instructions (Cont)
(43)
Move joystick (10) to LOAD until container (6) is approximately 2 ft. (61 cm) off the ground.
Release joystick.
CAUTION
Engine speed must be at idle before using hydraulic selector switch, or damage to
equipment may result.
(44)
Set hydraulic selector switch (9) to AUTO. Resume normal AUTO operations.
NOTE
Engine speed may be increased and decreased to ease loading.
(45)
After container (6) contacts rear sliders (16), increase engine speed to approximately 1500 rpm
until container is almost loaded. Reduce engine speed to idle.
(46)
Continue loading until container (6) is fully loaded and LHS NO TRANS lamp (23) goes out.
Change 1
|
