| |
TM 9-2320-304-14&P
2-82.20
Operating Instructions (Cont)
2-10.2 LOADING AND UNLOADING CONTAINER (82 INCHES [208 CM] OR TALLER)
TO TRUCK USING FRONT LIFT ADAPTER (FLA) (CONT).
(23)
Position slide arm upper front hooks (17) just below and in front of container upper corner
castings (18).
(24)
Apply service brake pedal (4) and set transmission range selector (5) to R (Reverse).
WARNING
Do not allow front lift adapter to contact the ground when slide arm upper front hooks are
not engaged with container upper corner castings. Failure to comply may result in damage
to equipment and injury or death to personnel.
(25)
Release service brake pedal (4) and slowly back up to approximately 12 in. (30 cm) from front of
container (6).
NOTE
LHS will only operate when transmission range selector is in N (Neutral).
(26)
Apply service brake pedal (4), set transmission range selector (5) to N (Neutral), move
joystick (10) to LOAD, and raise front lift adapter until front hooks (17) are above container
upper corner castings (18).
(27)
Set transmission range selector (5) to R (Reverse). Release service brake pedal (4) and slowly
back up until slide arm upper front hooks (17) are just above front of container upper corner
castings (18).
Change 1
|