|
| |
TM 9-2320-304-14&P
2-82.13
Operating Instructions (Cont)
WARNING
Make sure not to hold on to front of slider when stowing. Hands and fingers may be pinched
between front of slider and hard lift bracket causing injury to personnel.
NOTE
·
Rear of slider may have to be pulled out slightly to position front of slider on
retaining bracket.
·
Pivot lock pins may not lock if lock pin receptacle is full of debris. If this occurs,
remove debris and lubricate lock pin and lock pin fitting.
(23)
Pull down pivot lock pin handle (24), lift rear of slider (4), and rotate front of slider over
retaining plate (25) until pivot lock pins lock.
(24)
Release pivot lock pin handle (24).
(25)
Repeat steps (16) through (24) for right side.
Change 1
|
