|
| |
TM 9-2320-304-14&P
2-82.1
Operating Instructions (Cont)
(4)
Remove lock pin (6) and pin (7) from long strut (8) and strut bracket (9).
WARNING
Make sure fingers and hands are not between strut front and rear halves. Fingers and
hands could become pinched during assembly, causing injury to personnel.
(5)
Align long strut (8) with short strut (10).
(6)
Rotate slider arm (4) out with handle and disengage flip lock (5) by rotating it down.
(7)
Position long strut (8) into short strut (10), install pin (7), and lock pin (6). Make sure slider (2)
is in straight ahead position.
(8)
Repeat steps (1) through (7) for right side.
Change 1
|
