|
| |
TM 9-2320-304-14&P
H-5
H-5. LHS BUSHING REMOVER.
Fabricate LHS bushing remover from 3.38 in. (85.85 mm) x 4 1/2 in. (114 mm) diameter steel tubing.
a. Cut 4 1/2 in. (114 mm) outside diameter x 1/2 in. (13 mm) thick tubing to cut length of 3.38 in (85.85
mm).
b. Cut a 1/4 in. (6 mm) x 45 degree chamfer where indicated.
c. Paint as required.
|
