|
| |
TM 9-2320-304-14&P
2-71
Operating Instructions (Cont)
j. Loading Flatrack with or without Rollers from Dock Area or Bay (Not to Exceed Truck Chassis
Height).
CAUTION
Do not back up to loading docks in which the height of the dock exceeds the height of
bottom of the flatrack on the truck, or damage to equipment may result.
(1) Position truck approximately 5 ft. (1.5 m) from front of flatrack.
(2) Apply the service brake pedal (1) and set transmission range selector (2) to N (Neutral).
CAUTION
Set engine speed at idle before selecting LHS mode or damage to equipment may result.
NOTE
When loading or unloading flatrack from dock or bay area, presence of rollers on rear of
flatrack will aid in operation. Procedure can be accomplished using hydraulic selector
switch in AUTO position or MAN H.A. position and MAN M.F. position. Refer to Para 2-9 d.
and e. for movement of LHS in MANUAL mode.
(3) Put PTO ENGAGE switch (3) in ON position. Make sure indicator light (4) comes on.
(4) Turn the hydraulic selector switch (5) to MAN M.F., MAN H.A., or AUTO position as required.
|
