 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-303-24-2
WINDSHIELD REPLACEMENT - CONTINUED
0294 00
REMOVAL - CONTINUED
10.
Remove each windshield glass (1) and seal (3) as an
assembly from cab (4).
4
11.
Remove seal (3) from each windshield glass (1).
3
1
CLEANING AND INSPECTION
1.
Use general cleaning methods to clean all parts (WP 0306 00).
2.
If windshield is removed due to criteria outlined in Removal step 1, inspect channel of seal (where marked) for foreign
objects, and inspect mounting flange of cab for irregularities.
3.
Inspect all parts for wear or damage.
INSTALLATION
WARNING
Wear protective gloves when handling glass. Failure to do so could result in injury to personnel.
CAUTION
When handling windshield glass, be careful not to nick or splinter edges of glass. Chipped edges could
cause cracking later.
Do not use windshield sealant. Windshield sealant compounds are not needed and, if applied unevenly,
can cause leaks resulting in water damage.
NOTE
Manufacturer's ID number must be at lower center corner of windshield glass when installed.
If installing windshield glass only, perform steps 1 through 7. If installing seal or windshield glass and
seal, perform steps 8 through 23.
Steps 1 through 7 are the same for each windshield glass.
0294 00-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals