 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-303-24-2
FRONT SPRING HANGERS REPLACEMENT - CONTINUED
0283 00
INSTALLATION
NOTE
Perform steps 1 and 2 for each of two rear spring hangers.
1.
If removed, install new bushing (25) in rear spring hanger (23).
2.
Install four washers (22), screws (21), rear spring hanger (23), four washers (22), and new locknuts (24) on frame (7).
NOTE
Perform steps 3 and 4 on right-front side of vehicle.
3.
Install six washers (14), screws (15), right-front spring hanger (16), and new locknuts (13) on frame (20).
4.
Install three screws (17), washers (18), and new locknuts (19).
NOTE
Perform steps 5 through 7 on left-front side of vehicle.
5.
Install six washers (5), screws (10), left-front spring hanger (11), and new locknuts (6).
6.
Install screw (12), washer (8), and new locknut (9).
7.
Install threaded block (3), two screws (4), washers (2), and new locknuts (1).
8.
Tighten 5/8-11 grade 8 locknuts to 160 lb-ft (217 Nm).
9.
Install steering gear (left side only) (WP 0265 00).
10.
Install front spring (WP 0282 00).
END OF WORK PACKAGE
0283 00-3/4 blank
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals