 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-303-24-2
FRONT CAB MOUNTS REPLACEMENT - CONTINUED
0280 00
INSTALLATION
WARNING
Cab assembly weights 1100 lb (499 kg). Use hoist with lifting capacity of 1400 lb (636 kg) to support cab
assembly. Failure to do so could result in injury to personnel and/or damage to equipment.
NOTE
Procedure is the same for both sides except as noted.
Perform step 1 on right side.
1.
Install plate (37), three washers (36), screws (35), washers (34), and new locknuts (33).
NOTE
Perform step 2 on left side.
2.
Install plate (32), three washers (31), screws (30), three washers (29), and new locknuts (28).
3.
Install front cab mount (22) with four washers (21), screws (20), washers (19), and new locknuts (18).
4.
Install bushing (14), washer (13), and screw (23).
5.
Install resilient mount (15), washer (16), and new locknut (17).
6.
Lower cab assembly (27) and remove cab sling and hoist.
NOTE
Perform steps 7 and 8 on left side.
7.
Connect cable (12) and install screw (26), washer (25), and new locknut (24).
27
13
12
14
24,25,26
15
16
23
17
22
18,19,20,21
0280 00-5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals