 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-303-24-2
REAR CROSSMEMBER REPLACEMENT - CONTINUED
0276 00
REMOVAL
1.
Remove locknut (1), clamp (2), four tiedown straps (4) and set wiring harness (3) aside. Discard locknut and tiedown
straps.
NOTE
Vehicle may utilize huckbolts instead of screws and locknuts. Replace all loose or damaged huckbolts with
grade eight screws and locknuts.
2.
Remove eight locknuts (6), and washers (7), towing bracket (9), four screws (8), and reinforcement assembly (5). Dis-
card locknuts.
5
3
1,2
6,7,8
9
4
3.
Remove five locknuts (10), ten washers (11), five screws (12), two spacers (19), and right side gusset (13). Discard lock-
nuts.
4.
Repeat step 3 for left side gusset (17).
Plate weighs 96 lb (44 kg). Use hoist with lifting capacity of 200 lb (91 kg) to remove plate. Failure to do so
could result in injury to personnel.
5.
Attach hoist and remove 12 locknuts (14), 24 washers (15), screws (16), and plate (18). Discard locknuts.
0276 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals