 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-303-24-2
STEERING GEAR REPLACEMENT - CONTINUED
0265 00
REMOVAL
1.
Remove plug (14) from steering gear (15) and drain power steering fluid into suitable container.
2.
Install plug (14) in steering gear (15).
3.
Remove nut (6) and bolt (5) and disconnect lower universal shaft (8) from steering gear (15).
NOTE
Oil will be present when hoses are removed.
4.
Disconnect two hoses (7) from steering gear (15).
NOTE
Support steering gear during removal.
Tag screw location during removal to aid in installation.
5.
Remove two nuts (10), two washers (9), two screws (1), and two washers (2).
6.
Remove screw (13), lockwasher (12), and steering gear (15). Discard lockwasher.
7.
Remove elbow (4), tee (11), and two packings (3) from steering gear (15). Discard packings.
9
10
8
10
7
9
5,6
3,4
2
1
7
3,11
15
12
13
14
INSTALLATION
1.
Install two new packings (3), tee (11), and elbow (4) on steering gear (15).
NOTE
Support steering gear during installation.
2.
Install steering gear (15), new lockwasher (12), and screw (13).
3.
Install two washers (2), two screws (1), two washers (9), and two nuts (10). Tighten locknuts to 344-466 lb-ft (466-632
Nm).
0265 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals