 |
|||
|
|
|||
|
Page Title:
Assemble Input Shaft and Bearings |
|
||
| ||||||||||
|
|
 TM 9-2320-303-24-2
FORWARD-REAR AXLE DIFFERENTIAL CARRIER REPAIR - CONTINUED
0257 00
DIFFERENTIAL CARRIER ASSEMBLY - CONTINUED
(7)
Assemble the shift unit air chamber (44) over the shift shaft (43) and onto the helical gear cover (17).
Install bolt retainers (45) and bolts (41). Torque to 75-100 lb-in. (8.5-1 1.3 Nm).
41
45
17
44
43
402-689
(8)
After tightening the bolts (41), bend one ear of each retainer (45) up against the bolt head. Bend the other
two down against the top plate (42) of the chamber.
Assemble Input Shaft and Bearings.
k.
(1)
Install the input shaft (53) and the interaxle differential shift collar into the gear cover (17). While holding
the shift collar in position engaging it with the shift fork (47), insert the input shaft through the collar.
Index the shaft and/or collar to engage splines. At the same time the shaft splines must engage the oil
pump drive gear.
47
SHIFT
COLLAR
53
402-690
(2)
Press the forward bearing cone onto the input shaft while securing the shaft in position in the gear cover
(17).
(3)
Press the forward input bearing cup squarely into the bearing cage.
0257 00-40
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals