Assemble lnteraxle Differential cont'd

TM 9-2320-303-24-2

FORWARD-REAR AXLE DIFFERENTIAL CARRIER REPAIR - CONTINUED

0257 00

DIFFERENTIAL CARRIER ASSEMBLY - CONTINUED

NOTE

If the drive gear must be replaced with a new gear, replace both the drive and driven gears as a set.

(6)

Place drive gear (54) in a press with the flat side down and position the side gear (gear side down) with

woodruff key (60) over the drive gear. Make sure the woodruff key aligns with the keyway in the I.D. of

the drive gear.

(7)

Press the side gear (92) into the drive gear (54) until it bottoms.

(8)

Position the forward side gear and drive gear assembly over the interaxle differential case assembly (57)

already in position. Ensure that alignment marks are in proper position as shown.

ALIGNMENT

MARKS

402-685

(9)

When placing the side gear and drive gear assembly in position on the carrier, be sure to align mating

marks of both the drive and driven gears (92) as shown; if new gears are installed, mark one tooth of each

gear, as shown.

(10)

Check for free rotation of the gears (54 and 92).

0257 00-37