 |
|||
|
|
|||
|
Page Title:
REPAIR OR REPLACEMENT - CONTINUED |
|
||
| ||||||||||
|
|
 TM 9-2320-303-24-2
FORWARD-REAR AXLE DIFFERENTIAL CARRIER REPAIR - CONTINUED
0257 00
REPAIR OR REPLACEMENT - CONTINUED
(2)
Application of silastic is as follows:
(a) Remove dirt, grease or moisture from the surface of the carrier and housing.
(b) Dry the surface.
(c) Apply thin bead, approximately 1/8-inch diameter completely around one mating surface and all fas-
tener holes to assure complete sealing and prevent leakage.
WARNING
Minor concentrations of acetic acid vapor may be produced during application.
Adequate ventilation should be provided when silicone is applied in confined areas. Further, eye contact
may cause irritation.
If eye contact takes place, flush eyes with water for 15 minutes and have eyes examined by a doctor.
(d) Assemble the components immediate/y to permit silastic to spread evenly.
Wear Sleeve Replacement.
c.
(1)
Place the yoke on its side in a vise.
CAUTION
Do not completely split or penetrate the sleeve bushing and damage the yoke.
(2)
Using a cold chisel, notch the wear sleeve slightly to expand the sleeve bushing and permit its removal
from the yoke.
YOKE
SLEEVE BUSHING
402-665
0257 00-19
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals