Remove Input Shaft, Forward Bearing, and Shift Collar cont'd

TM 9-2320-303-24-2

FORWARD-REAR AXLE DIFFERENTIAL CARRIER REPAIR - CONTINUED

0257 00

DIFFERENTIAL CARRIER DISASSEMBLY - CONTINUED

NOTE

In step (3), as the input shaft is pressed through the gear cover and the interaxle differential shift collar inside

the cover, the collar will drop from the shift fork and shaft. Also, the input bearing will remain loose in the

cover. If seal and/or bearing removal is necessary, continue with step (4).

(3)

Using a press, remove the input shaft (33) from the gear cover (17). Press out shaft from the front (input)

end.

(4)

Disassemble the input bearing cover (34) from the gear cover (17) by removing cage-to-cover capscrews

(35) and washers (36). Remove bearing cover, bearing (37), and shim pack (38). The bearing cup (39) will

remain in the cover.

(5)

Remove the oil seal (40) from the bearing cover (34) using a press and suitable sleeve. If press is not avail-

able, use a drift and hammer and tap out seal.

NOTE

Keep the shim pack from under the bearing cover wired together for reassembly.

(6)

Remove the bearing cup (39) from the cover (34) by using a press or suitable puller.

402-980A

0257 00-9