 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-303-24-2
FORWARD-REAR AXLE DIFFERENTIAL CARRIER REPLACEMENT - CONTINUED
0256 00
INSTALLATION
1.
If removed, install new oil filter adapter (8).
WARNING
Forward-rear axle differential carrier weighs 1,160 lb (526 kg). Attach suitable floor jack prior to installation
to prevent possible injury to personnel.
CAUTION
Make sure both mating surfaces have been completely cleaned to prevent damage to equipment.
2.
Install differential carrier (7) on floor jack and roll differential carrier into position under vehicle.
WARNING
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and are harmful to
skin and clothing. To avoid injury or death, keep away from open fire and use in well-ventilated area. If
adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water.
NOTE
If axle assembly has been removed from vehicle, perform steps 3 through 5 only.
3.
Apply 1/8-in. bead of sealing compound around mating surface of axle (6).
4.
Attach suitable hoist and install differential carrier (7), two washers (1), and two nuts (2). Do not tighten nuts.
5.
Install 10 washers (5) and 10 capscrews (4). Tighten 10 capscrews and two nuts to 150-230 lb-ft (203-312 Nm).
6.
Connect air line (3).
7.
Install axle oil filter (WP 0120 00).
8.
Connect drivelines (WP 0116 00).
9.
Fill axle with oil (WP 0120 00).
END OF WORK PACKAGE
0256 00-3/4 blank
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals