 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-303-24-2
FRONT AXLE REPLACEMENT - CONTINUED
0249 00
REMOVAL - CONTINUED
WARNING
Front axle weighs 1,060 lb (481 kg). Support front axle with suitable floor jack during removal to prevent
possible injury to personnel.
NOTE
Make sure front of vehicle is blocked up enough to allow removal of axle.
3.
Position suitable floor jack under center of axle (12) and secure axle to floor jack.
NOTE
Note position of axle stops during removal to aid in installation.
4.
Remove eight nuts (10), eight washers (11), four U-bolts (8), and two axle stops (7).
5.
Lower axle (12) and remove from vehicle.
6.
Remove spacer (14) and shim (9).
7.
Remove pin (13) from spacer (14).
8.
Using lifting device, remove axle (12) from floor jack.
7
8
13,14
9
10,11
12
INSTALLATION
WARNING
Front axle weighs 1,060 lb (481 kg). Support front axle with suitable floor jack during installation to prevent
possible injury to personnel.
NOTE
Procedure is the same for both sides except where noted.
1.
With axle (12) installed and secured on suitable floor jack, position axle under vehicle.
2.
Coat bottom of shim (9) with sealing compound and install shim on axle (12) with wide end of shim toward rear of vehi-
cle.
0249 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals