 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-303-24-2
RADIATOR REPAIR - CONTINUED
0231 00
REMOVAL
1.
Remove two nuts (15), two clamps (17), hose (23), and radiator cap (27).
2.
Remove nut (26), clamp (25), two clamps (2), and hose (24).
3.
Remove two nuts (1) and expansion tank (3) from radiator (4).
4.
Remove 17 nuts (20), bolting bar (7), 20 screws (22), and top channel (21).
5.
Remove 17 nuts (9), bolting bar (16), 20 screws (13), and bottom channel (14).
6.
Remove 40 nuts (19), 40 screws (12), four bolting plates (5), four header bars (11), outlet tank (18), inlet tank (8), and
two radiator gaskets (6). Discard gaskets.
7.
Remove drain plug (10) from inlet tank (8).
INSPECTION
1.
Inspect all parts for wear or damage.
2.
Pressure test radiator at 15.0 psi (103.4 kPa) for leaks.
REPAIR
1.
If repair is required, no more than 12 tubes can be blocked off.
2.
Refer to TM 750-254 for additional information on cooling system repair.
ASSEMBLY
1.
Install two new radiator gaskets (6), inlet tank (8), outlet tank (18), four header bars (11), four bolting plates (5), 40
screws (12), and 40 nuts (19).
2.
Install bottom channel (14), 20 screws (13), bolting bar (16), and 17 nuts (9).
3.
Install top channel (21), 20 screws (22), bolting bar (7), and 17 nuts (20).
4.
Install expansion tank (3) and two nuts (1).
5.
Install hose (24), two clamps (2), clamp (25), and nut (26) on radiator (4).
6.
Install radiator cap (27), hose (23), two clamps (17), and two nuts (15).
7.
Install drain plug (10) in inlet tank (8).
8.
Replace radiator (WP 0044 00).
0231 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals