 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-303-24-1
AIR HORN AND VALVE REPLACEMENT - CONTINUED
0202 00
AIR HORN INSTALLATION
1.
If removed, install plate (15) to cab floor (4) with washer (14), screw (13), and nut (16).
2.
Install bracket (11) to plate (15) with two washers (10), screw (9) and new locknut (12).
WARNING
Adhesives and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and
clothing. To avoid injury or death, keep away from open fire and use in a well-ventilated area. If adhesives
or sealing compound contacts skin or clothing, wash immediately with soap and water.
3.
Apply pipe sealing compound to nipple (5) and install nipple, elbow (2), and air tube (1) to air horn (8).
4.
Position air horn (8) to bracket (11) and cab floor (4).
5.
Secure air horn (8) in place with two washers (6), two screws (7) and new locknuts (3).
2
3
1
4
16
5
12
10
6
15
11
14
7
13
10
8
9
6.
Start vehicle and check for leaks in air system and operation of air horn (TM 9-2320-303-10).
7.
Install head liners (WP 0177 00).
8.
Install cab overhead storage compartment (WP 0194 00).
END OF WORK PACKAGE
0202 00-3/(0202 00-4 blank)
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals