 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-303-24-1
SEAT REPAIR - CONTINUED
0185 00
DISASSEMBLY - CONTINUED
10.
With isolator assembly (8) still in rear position, remove isolator spring (32) and rubber bumper (31) at rear.
11.
Adjust isolator assembly (8) to forward position and remove isolator spring (32) and rubber bumper (31) at front.
12.
Remove three wire ties (36) from air lines (37).
13.
Remove six screws (38) and lockwashers (39) from sides of isolator assembly (8) and six screws (38) and lockwashers
(39) from underside of isolator assembly to free two guide assemblies (50). Discard lockwashers.
14.
Remove two guide assemblies (50) and valve mount (40) from isolator assembly (8).
15.
Remove two rollers (51) from each guide assembly (50).
16.
Disconnect end of spring (43) from latch bar (45).
17.
Remove bolt (33), washer (34), pivot block (35), latch bar (45), and spacer (42) from isolator assembly (8). Remove
screw (44) from latch bar.
18.
Separate isolator assembly (8) from upper plate (7) and disconnect spring (43) and split poly loom (41) from isolator
assembly.
19.
Remove locknut (30), washer (29), control handle (54), spring (55), split poly loom (56), washer (48), and shoulder bolt
(47) from channel (8). Discard locknut.
20.
Remove spring (46), detent pin (49), pop rivet (53), and knob (52) from control handle (54). Discard pop rivet.
21.
Remove two brackets (28) and tilt rod (58) from channel (8). Remove knob (37) from tilt rod.
31
33
34
28
30
32
32
31
29
35
8
56
36
58
37
55
38
53 54
57
39
48
42
52
51
47
40
49
41
50
44
46
43
39
45
38
7
0185 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals