 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-303-24-1
FRONT SPLASH GUARD AND FENDER EXTENSION MAINTENANCE - CONTINUED
0184 00
DISASSEMBLY - CONTINUED
4.
Remove locknut (16), two washers (19), cap screw (20), and bracket (21). Discard locknut.
5.
Remove locknut (16), two washers (19), cap screws (26), two brackets (25 and 27), and brace (23) from bracket (24).
Discard locknuts.
6.
Remove locknut (16), two washers (19), cap screw (18), brace (22), and bracket (17) from bracket (24). Discard lock-
nuts.
19
22
16
19
21
19
19
18
17
20
16
19
19
23
25
19
29
19
26
24
28
27
16
29
28
19
ASSEMBLY
1.
Install bracket (17) and bracket (22), on bracket (24). Secure in place with screw (18), two washers (19), and new lock-
nut (16).
2.
Install brace (23) and brackets (25 and 27) on bracket (24). Secure in place with cap screw (26), two washers (19), and
new locknut (16).
3.
Install bracket (21) on bracket (24) with screw (20), two washers (19), and new locknut (16).
4.
Install bracket (29) on each bracket (17 and 27). Secure with cap screw (28), two washers (19), and new locknut (16).
5.
Attach bracket (15) to front fender extension (4) and secure with screw (11), two washers (12 and 14), and new locknut
(13).
6.
Attach front fender extension (4) with three screws (11), washers (12), washers (14), and new locknuts (13).
7.
Install splash guard (5) and two braces (8) to fender extension and bracket assembly with six cap screws (10), 12 wash-
ers (7), four nuts (6), and two new locknuts (9).
0184 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals