 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-303-24-1
ENGINE HOOD ASSEMBLY REPLACEMENT - CONTINUED
0178 00
REMOVAL - CONTINUED
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Failure to follow this warning may result in injury to personnel.
9.
Using four personnel, lift hood (9) approximately 4 in (10.2 cm) and walk toward front of vehicle until hood clears vehi-
cle.
9
INSTALLATION
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Failure to follow this warning may result in injury to personnel.
1.
Using four personnel, install hood (9) to vehicle aligning hinge bracket on hood with bracket on front bumper.
2.
Install two bolts (13) and new locknuts (14) to hinges (15).
3.
When installing tilt assist cable, hood must be supported to prevent damage to hood or injury to personnel.
4.
Open and support hood (9) (TM 9-2320-303-10).
5.
Install two tilt assist cables (10) in two chain links (11) and close chain links by tightening two nuts (12).
0178 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals