|
|
TM 9-2320-303-24-1
FIFTH WHEEL ADJUSTMENT - CONTINUED
0170 00
ADJUSTMENT - CONTINUED
NOTE
Bushing should be snug, but able to rotate. If bushing does not rotate or rotates too freely, perform step 4.
4.
If bushing (4) is too tight, rotate nut (3) on yoke shank (7) counterclockwise until bushing is snug. If bushing is loose,
rotate nut clockwise until bushing is snug, but still rotates.
4
3
5
7
6
HAUL
LOAD
5.
Verify proper adjustment by locking and unlocking fifth wheel (2) several times with lock tester (1).
2
1
6.
Remove profile gage (5) and kingpin lock tester (1).
END OF WORK PACKAGE
0170 00-2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |