 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-303-24-1
POWER STEERING RESERVOIR AND HOSES REPLACEMENT - CONTINUED
0159 00
REMOVAL - CONTINUED
1.
Remove plug (3) and drain power steering reservoir (7).
NOTE
Oil will be present when hoses are removed.
2.
Remove four clamps (5), hose (6), and elbow (4) from power steering reservoir (7).
3.
Remove two hoses (2), three elbows (1), cap (12), tap (13), and tee (14).
4.
Remove two locknuts (10), two washers (11), two screws (9), two washers (8), and power steering reservoir (7). Discard
locknuts.
6
5
4
5
7
2
3
1
1
8
9
10
11
1
14
2
13
12
INSTALLATION
1.
Install power steering reservoir (7), two washers (8), two screws (9), two washers (11), and two new locknuts (10).
WARNING
Spilled hydraulic fluid is very slippery. Wipe up and spilled fluid immediately. Failure to do so could result
in serious injury to personnel.
2.
Install tee (14), tap (13), cap (12), three elbows (1), and two hoses (2).
3.
Install plug (3), elbow (4), hose (6), and four clamps (5) in power steering reservoir (7).
4.
Fill power steering reservoir (TM 9-2320-303-10).
END OF WORK PACKAGE
0159 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals