|
|
TM 9-2320-303-24-1
PITMAN ARM AND DRAG LINK REPLACEMENT - CONTINUED
0158 00
INSTALLATION
1.
Install pitman arm (2), screw (1), washer (9), and new locknut (8) on steering gear (3). Tighten locknut to 150-220 lb-ft
(203-312 Nm).
2.
If removed, install two new grease fittings (6) in drag link (7).
3.
Install drag link (7) and two nuts (5). Tighten nuts to 160-215 lb-ft (217-292 Nm).
NOTE
Nuts may be tightened further, but not to exceed 300 lb-ft (407 Nm), if necessary for installation of cotter
pins.
4.
Install two new cotter pins (4).
3
4
5
1
2
4
6
7
8
9
6
5
5.
Lubricate pitman arm and drag link (WP 0024 00).
END OF WORK PACKAGE
0158 00-2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |