 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-303-24-1
UNIVERSAL SHAFT MAINTENANCE - CONTINUED
0157 00
DISASSEMBLY
1.
Remove four snap rings (16), bearings (14), lower yoke (18), and cross (17) from lower shaft (4).
2.
Repeat step 1 for upper yoke (15).
14
15
16
4
14
16
17
18
16
14
ASSEMBLY
1.
Install cross (17), lower yoke (18), four bearings (14), and snap rings (16) on lower shaft (4).
2.
Repeat step 1 for upper yoke (15).
INSTALLATION
1.
If removed, install boot (5) on firewall (12) with ten new rivets (13).
2.
Install splined end of lower shaft (4) through boot (5).
3.
Install lower shaft (4) on steering gear (1).
4.
Support lower shaft (4) on steering gear (1) and install screw (2) and new locknut (3).
5.
Install upper shaft (7) through boot (5) and onto lower shaft (4).
6.
Install bushing (10) on boot (5).
7.
Install grease fitting (6) in upper shaft (7).
8.
Connect upper shaft (7) to steering column (8) and install screw (11) and new locknut (9).
9.
Install steering column cover (WP 0195 00).
0157 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals