REAR TRACTOR PROTECTION VALVE INSTALLATION

TM 9-2320-303-24-1

TRACTOR PROTECTION VALVES REPLACEMENT - CONTINUED

0143 00

REAR TRACTOR PROTECTION VALVE INSTALLATION

WARNING

Adhesives and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin

and clothing. To avoid injury or death, keep away from open fire and use in a well-ventilated area. If

adhesives or sealing compound contacts skin or clothing, wash immediately with soap and water.

Ensure all air lines and fittings are clear of debris and excess pipe sealing compound does not enter air

lines or fittings. Failure to follow this warning could result in injury to personnel or damage to equip-

ment.

Install tractor protection valve (6) with two bolts (4), four washers (3), and two new locknuts (2).

Coat threads of one elbow (7) and five adapters (5) with pipe sealing compound.

Install five adapters (5).

Install one elbow (7).

Connect five air lines (1) to tractor protection valve (6).

2,3,4

Start vehicle and check air system for leaks (TM 9-2320-303-10).

END OF WORK PACKAGE

0143 00-4