 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-303-24-1
REAR AXLE MAINTENANCE - CONTINUED
0120 00
DRAINING OIL - CONTINUED
3.
Allow oil to drain.
4.
Wipe magnetic plugs and axle housing.
5.
Screw in plugs.
REPLACING OIL FILTER
1.
Remove two filter cover nuts (5). Replace studs (4) if damaged.
2.
Slide off filter cover (3).
3.
Using a strap wrench, remove and discard filter (2).
4.
Moisten gasket with oil.
5.
Install new filter (2) by tightening until gasket contacts adapter, then tighten one more full turn.
6.
Slide filter cover (3) over new filter (2) and studs (4).
7.
Secure with two nuts (5).
REPLENISHING OIL
1.
Fill front-rear axle with 40 pints (19 liters) of gear oil and install filler plug (7) or (11).
2.
Fill rear-rear axle with 36 pints (17 liters) of gear oil and install filler plug(s) (1 or 9).
CHECKING FOR LEAKS
1.
Road test vehicle.
2.
Check filler plugs (1 and 7) or (9 and 11), drain plugs (6 and 8) or (10 and 12), filter (2) for leaks.
1
2
3
4
5
8
9
7
6
10
12
11
3.
Check oil level. Add more oil if necessary.
END OF WORK PACKAGE
0120 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals